top of page
MAP.jpg

Firmware Files

NOTE: The files downloaded from this page are only for use in manually updating your TCS product. These files can be used with JMRI or the Integrated Web Interface.
 
TCS Depot will automatically download and the latest firmware for your device. Manual downloading of these files when using Depot is not required.

 

Please visit our Videos page for tutorials on how to update your device using each of these methods.

UWT-50 Firmware Files

UWT-50 Version 3.4

Release 3.4 makes the following changes and improvements to the UWT-50E:
- Fixes bug when the locomotive speed would jump to 126 unexpectedly after the throttle has been sitting idle for some time.
- Adds a configuration option for disabling or changing the sensitivity of the ballistic tracking (acceleration) for the encoder knob. Menu > 8 Settings > 1 Throttle Settings > 3 Drive Settings > Encoder Ballistics > Off/Low/Mid/High. The default of this setting will be Mid, whereas throttle software until 3.2 had the same behavior as Low. Changing the setting to Off will disable all ballistics and the knob will control the speed at a constant rate with the rotation.
- Improved behavior when the encoder knob is turned very fast.

There are no changes made in this release for the UWT-50P.

Click the link below to download the firmware file for Release 3.4:

UWT-50 Version 3.2

Release 3.2 is a scheduled update which makes changes to the UWT-50 based on user feedback:

- UWT-50E ONLY: Removed ballistic tracking when using the Encoder knob in the menus and text entry window.

- All UWT-50s: Minor bug fixes and performance improvements in specific circumstances.

Click the link below to download the firmware file for Release 3.2:

UWT-50 Version 3.0.1

Release 3.0.1 is a "hotfix" release for the UWT-50. Release 3.0.1 fixes an issue with compatibility and communication with a LCC Hub run using JMRI.

Please see the Release Notes for R3.0 for the full list of other changes in this release. Click the link below to download the firmware file for Release 3.0.1:

UWT-50 Version 3.0

Release 3.0 is a scheduled production release for the UWT-50. Release 3.0 is the first software release for the UWT-50 which fully supports the CS-105.

Please see the Release Notes for the full list of changes in this release. Please download Version 3.0.1 (above) which is identical to this release but includes an additional fix. 

UWT-50 Version 2.4

Release 2.4 is the first production release for the UWT-50, including pre-orders. Use this file only if you have an issue with a newer release and need to revert to the original firmware.

Please see the Release Notes for the full list of changes in this release.

Click the link below to download the firmware file for Release 2.4:

UWT-100 Firmware Files

UWT-100 Version 3.4

Release 3.4 makes the following changes and improvements to the UWT-100:
- Fixes bug when the locomotive speed would jump to 126 unexpectedly after the throttle has been sitting idle for some time.
- Adds a configuration option for disabling or changing the sensitivity of the ballistic tracking (acceleration) for the encoder knob. Menu > 8 Settings > 1 Throttle Settings > 3 Drive Settings > Encoder Ballistics > Off/Low/Mid/High. The default of this setting will be Mid, whereas throttle software until 3.2 had the same behavior as High. Changing the setting to Off will disable all ballistics and the knob will control the speed at a constant rate with the rotation.
- The sensitivity of the thumbwheel is adjusted down in the text entry window to match that of the menus. This will make it easier to select individual characters and enter text.

Click the link below to download the firmware file for Release 3.4:

UWT-100 Version 3.2

Release 3.2 is a scheduled update which makes changes based on user feedback for the UWT-100.

- Adds support for Magnetic Encoder in UWT-100.

- Removes ballistic tracking when using the thumbwheel in the menus and text entry window.

- Bug fixes and performance improvements in specific situations.

Click the link below to download the firmware file for Release 3.2:

UWT-100 Version 3.0.1

Release 3.0.1 is a "hotfix" release for the UWT-100. Release 3.0.1 fixes an issue with compatibility and communication with a LCC Hub run using JMRI.

Please see the Release Notes for R3.0 for the full list of other changes in this release. Click the link below to download the firmware file for Release 3.0.1:

UWT-100 Version 3.0

Release 3.0 is a scheduled production release for the UWT-100. Release 3.0 is the first software release for the UWT-100 which fully supports the CS-105.

Please see the Release Notes for the full list of changes in this release. Please download Version 3.0.1 (above) which is identical to this release but includes an additional fix. 

UWT-100 Version 2.4

Release 2.4 is a scheduled software release for the UWT-100 that adds additional features, brings improvements to existing features based on the feedback of our users, and fixes some minor bugs.

Please see the Release Notes for the full list of changes in this release.

Click the link below to download the firmware file for Release 2.4:

B-106 Firmware Files

B-106 Version 1.0

Release 1.0 is the first production release for the B-106, including pre-orders. Use this file only if you have an issue with a newer release and need to revert to the original firmware.

Click the link below to download the firmware file for Release 1.0:

Download Coming Soon!

CS-105 Firmware Files

CS-105 Version 1.0.1

Release 1.0.1 fixes an issue with compatibility and communication with a LCC Hub run using JMRI. Release 1.0 is the first production release for the CS-105, including pre-orders, and should be updated to 1.0.1 to fix this issue if you encounter it.

Click the link below to download the firmware file for Release 1.0.1:

CS-105 Version 2.0

Release 2.0 is a scheduled software release for the CS-105 that adds additional features, brings improvements to existing features based on the feedback of our users, and fixes some minor bugs.

Please see the Release Notes for the full list of changes in this release.

Click the link below to download the firmware file for Release 2.0:

Download CS-105 R2.0 (Coming Soon)

LT-50 Firmware Files

LT-50 Version 1.0

Release 1.0 is the first production release for the LT-50. Use this file only if you have an issue with a newer release and need to revert to the original firmware.

Click the link below to download the firmware file for Release 1.0:

Note on downgrading to R1.0 from R2.X or later:

TCS does not recommend downgrading the software from Version 2.0 to any earlier version. Such a downgrade, as well as any following upgrade will cause loss or inconsistency of Consist and Roster information. A computer backup of Roster and other Database information is strongly advised.

Download Coming Soon!

LT-50 Version 2.2

Release 2.2 is a scheduled software release for the LT-50 which brings improvements to existing features based on the feedback of our users, and fixes some minor bugs.

Please see the Release Notes for the full list of changes in this release.

Click the link below to download the firmware file for Release 2.2:

Download Coming Soon

bottom of page