|
Factory reset can be done on the
main track or on the programming track. To
reset CV's
to there factory setting write a value of 2 into CV30 or CV8.
The reset occurs the moment the decoder gets the reset command.
(Earlier decoder versions had to go through a power on/off
before the reset occurred.) CV's
that will reset to factory default: 1, 2, 3, 4,
5, 6, 17, 18, 19, 29, 30, 49, 50, 53, 54, 55, 56, 57, and
61. The user-loadable speed table is not affected by
the reset.
Note:
Writing to CV8 doesn't actually change the value in CV8, because
it is a read-only register. When writing to CV8, it will
write to CV30. This enables a factory reset with command
stations that use physical register programming, like the MRC
2000 Command and the Atlas Commander.
|
