Most of the files are literature that is supplied with the decoders or harnesses. These are shown with a
red description. All files are presented in color and larger type for easier readability. The others are information that will simplify or solve common problems. These have adark blue description. All these files are PDF files. You will need Adobe Acrobat Reader installed in your computer. You may also get these from your dealer.
| HO Scale Decoder Selection | A listing of HO scale trains and the decoders to use in them. |
| N Scale Decoder Selection | A listing of N scale trains and the decoders to use in them. |
| TCS Book of DCC Vol. 1 | The first volume of the Train Control Systems guide to DCC Installations. |
| TCS Book of DCC Vol. 2 | The second volume of the Train Control Systems guide to DCC Installations. |
| Dealer Packet | Decoder selection guide for dealers and end users. |
| BEMF Manual | A Guide to all of the features and control of BEMF |
| Lighting and Resistor values | This table and diagram explains wiring lighting functions with the proper resistor values |
| Simple Programming Guide | Shows programming information for all TCS decoders that is not always included with the literature that comes with the decoder. |
| New Users Guide | Shows the features of TCS decoders and the use of the following worksheets: |
| Additional Programming GuideNEW | A Guide to programming the additional functions within TCS decoders. |
| Plain English Programming Guide | A useful easy to understand guide for programming commonly used CV'S |
| List of Default CV values | A complete listing of the CV's in all TCS decoder with a description of each, and their default values. |
| This guide explains all the X series features in the decoder line. All TCS decoders now have X series features including the T1. | |
| Resistance and Ohms lawNEW | A brief explanation of Ohms law and the calculation of resistance. |
| MP-15N NEW | N Scale drop in decoder for Atlas N scale MP-15 locomotive. |
| AMD1 NEW | Two function drop in for Atlas N scale diesels |
| A4X decoder | Four function, 1.3-amp HO "drop in" decoder for Atlas, Athearn, Kato, etc. |
| A6X decoder | Six function, 1.3-amp HO "drop in" decoder with 1.5 volt regulated power supply for Atlas, Athearn, Kato, etc. |
| DP5X decoder |
Plug-N-Play Decoder
with FIVE 100mA function outputs 1.3 amp continuous, 2.0 amp peak motor drive |
| FL2 decoder | Two function, HO "lighting only" decoder with 6-pin mini wiring harness. |
| FL4 decoder | Four function, HO "lighting only" decoder with 6" flying leads |
| M1 decoder | Two function, 1-amp N or HO small hard-wired "micro decoder" |
| UK Harness Information | Shows the M1 decoder with UK harness installation information for various British outline locomotives. |
| M1P-15NEW | Drop in installation of M1 decoder with harness for Atlas HO scale MP-15 locomotive |
| M3 decoder | Three function, 1-amp N or HO hard-wired micro decoder |
| M4 decoder | Four function 1 amp N or HO hard wired micro decoder |
| MC2 decoder | Two function, 1 amp, N or HO with mini 7 pin connector "micro decoder" |
| MC4 decoder | Four function, 1 amp, N or HO with mini 7 pin connector "micro decoder" |
| MC6 decoder | Six function, 1 amp, N or HO with mini 7 pin connector "micro decoder" |
| T1 decoder | Two function, 1.3-amp HO decoder with 9-pin wiring harness. |
| T4X decoder | Four function, 1.3-amp HO decoder with 9-pin wiring harness. |
| T5X decoder | Five function, 1.3-amp HO decoder with 9-pin wiring harness. |
| T6X decoder | Six function, 1.3-amp HO decoder with 9-pin wiring harness |
| NMRA Harnesses | Shows the harnesses full size with an application chart. |
| C628 harness | 1 ¾" between connectors. Located behind the NMRA socket. |
| E6 harness | 3 9/16" between connectors. Located behind the NMRA socket. |
| LH harness | 7" between connectors. Located ahead of the NMRA socket. |
| MH harness | 3 ⅝" between connectors. Located ahead of the NMRA socket. |
| P2K harness | ⅜" between connectors. Located behind the inverted NMRA socket. |
| PA harness | 2 ⅞" between connectors. Located behind the NMRA socket. |
| SH harness | 1 ¼" between connectors. Located ahead of the NMRA socket. |
| STF harness | ⅜" between connectors. Located behind the 90° rotated NMRA socket. |
| VO harness | ¼" between connectors. Located ahead of the NMRA socket. |
| PR1 Problem Fixes | Shows two problems which can happen getting the PR1 to work properly. |
Entire contents © Copyright Train Control Systems 2003-2007• Last Modified: Monday January 21, 2008 09:07 AM
