Atlas VO-1000 Decoder Installation

Important Installation note: We recommend placing small piece of Kapton tape between the motor leads and the locomotive frame. There is virtually no clearance and a possible short can occur which will damage the decoder.  Click here for more information and pictures. VO-1000 is four function decoder.  Comes with sunny white surface mount LED'S for realistic front and rear lights. MSRP $34.95. We recommend CV56=3, CV57=50 for Dither (digital pulse power) settings.

Arrows point to function pads.  This is a small decoder but we were still able to make it with four functions. Because the space is tight the solder pads for the extra functions had to be small.  Use good care when soldering onto these pads. Avoid solder bridges to adjacent pads!

 

Installations Decoder Decoder What's New Literature TCS Dealers Warranty TCS Harnesses Dealer Application Contact Us FAQ Order Page

Entire contents © Copyright Train Control Systems 2003-2007 • Last Modified: Wednesday November 19, 2008 06:34 AM

 


Home :: Installation Pictures :: What's New :: Order Page :: Dealer Application :: Decoder Selection
Warranty :: TCS Dealers :: Literature :: Contact TCS :: TCS  Harnesses :: FAQ

Entire contents © Copyright Train Control Systems 2004-2009