|
|
Description and photos Krzysztof Czaplicki – Poland
The model is fitted with decoder socket (6 pins) and there was no need to modify
anything. Decoder was glued with two sided type in free place near ballast.
Instead of using 6pins plug the ends of decoders wires have been plated with tin
and firmly put in the holes of decoder socket. To run locomotive and to program
decoder I use Lenz Compact. I had to change values in some CVs and was totally
satisfied with the results. The same installation could be done in following TT
locomotives produced by Tillig: BR132/232/234 (the same locomotive family)
|
|
Entire contents © Copyright Train Control Systems 2006 • Last Modified: Wednesday September 26, 2007 08:06 AM
