|
|
Blue Line EMD SD9 HO Scale locomotive.
There are several good options for installing a TCS decoder in this Blue Line EMD SD9 locomotive. The DP2X is the most simple and straight forward, it plugs directly into the 8 pin NMRA socket supplied with the locomotive. The TCS extension plug must be used with the DP2X decoder for this installation. The extension plug is sold separately from the decoder. If your dealer does not have an extension plug in stock call TCS directly and we will mail one to you right away. The T1 decoder with a medium length harness, the MC2 decoder with a short or medium length harness, or a M1 decoder with a medium length harness will also work just fine. Below are pictures of some of the options.
NOTE: This locomotive with a T1 installed is available from TCS for $129.95 + shipping. It is brand new and we only only have this one that was obtained for these installation pictures. Once it is gone it is gone. It includes the original packaging, plus the factory sound decoder, and our installed T1. If interested call us at 215-453-9145.
This is another classic installation for the DP2X! DP2X with
extension socket. DP2X stands for "Direct Plug-two function- X
series lighting effects".
Photo
below shows T1 decoder with medium length harness. A T1 decoder ordered together
with a medium harness is part number T1P-MH.
Photo
below shows MC2 decoder with a short harness, part number MC2P-SH
Photo
below shows MC2 with a medium length harness, part number MC2P-MH.
|
|
Entire contents © Copyright Train Control Systems 2003-2007 • Last Modified: Tuesday January 01, 2008 05:19 AM
