Bachmann Ge DASH 8-40C

T1P-1"/MC2P-1"

Decoder Installation

NOTE: DO NOT CUT THE CAPACITORS ON THIS INSTALLATION!

This installation uses either the T1 or the MC2 with a 1" harness.

This train runs backwards as a default. To correct this program CV 29 to a value of 7 for standard operation.

 

The capacitors are on the lighting circuit not the motor circuit, so they should not be cut.

Installations Home Decoder What's New Literature TCS Dealers Warranty TCS Harnesses Dealer Application Contact Us FAQ Order Page

Entire contents © Copyright Train Control Systems 2003-2007 • Last Modified: Wednesday September 26, 2007 08:07 AM