|
|
Photos by Jim Starbuck of Clinton, Iowa
Before AMD1 decoder installation. Photo shows original light board.
AMD1 decoder installed.
Photo below shows loco frame disassembled. Although it looks like a big job it is actually very simple. Once the two screws are removed, the frame separates. The original light board is easily removed and the AMD1 decoder easily installed. Use care in alignment of the frames, motor mount, and gears when re assembling. The trucks can be put on last, they snap into place.
|
|
Entire contents © Copyright Train Control Systems 2003-2007 • Last Modified: Wednesday September 26, 2007 08:21 AM
