Atlas GP7 with A1X drop in decoder

The A1X drop in decoder replaces the original light board. Important note. Be very careful when installing the original bulbs on the A1X decoder.  The bulb leads are not insulated and can short against components on the decoder and damage it. Use care to align the bulbs so that when body shell is installed the light pipes do not move against the bulbs and cause a short circuit on the decoder! A piece of electrical tape placed under the light bulb leads is also a good idea to protect against short circuits.

                    Be careful here                                                                       Especially be careful here

Entire contents © Copyright Train Control Systems 2003-2007 • Last Modified: Wednesday September 26, 2007 06:16 AM