T3X Decoder

Train Control Systems

T6X 6 function decoder

The T6X is our most robust harness decoder. With its 6 functions and auxillary harnessthis decoder can control even the most complex of trains. In addition to the large number of functions, this decoder has X series lighting effects, including Mars and Gyra light. It has Quiet Drive and Dither. It is supplied with our standard wiring harness. Other harnesses with NMRA 8-pin plugs are available. Go to harness selection for choices to simplify your decoder installation. MSRP $27.95. T6X decoder literature

Electronic Specifications: 1.3amp continuous motor drive, Two-amp peak motor drive, six 100 mA function outputs

Dimensions: Length: .9", Width: 0.665", Height: 0.255"

Features: (click here for X series information)

Six 100ma functions! All functions re mapable to buttons 0-12
Adjustable Dimming (click for more information on this )
Three point acceleration and deceleration curves. Allows stretching of acceleration rates at the slow speeds. You are no longer limited to a straight line accel / decel rate.
Improved Lighting Effects: Blinking ditch lights fade on/off like the prototype. MARS is smoother and adjustable via a group of 5 CV's. Rotary Beacon is improved and adjustable. Auto-reversing headlights, Opposite Dim, Flashing. Single and double pulse strobes, and Random flicker. Rule 17 headlight dimming can be set to occur when stopped, opposite the direction of travel, or both. Can be set for LED or incandescent bulbs .
Decoder Lock
Quiet Drive is active at all times, which greatly reduces engine noise.
Dither provides rapid bursts of power to overcome resistance. You control both the power and frequency. See slow speeds unequalled in the industry.
Button Control allows you to pick the control buttons of your choice.
Activation of Rule 17 and Blinking Ditch light buttons is selectable.
Factory Reset lets you change most of your choices back to their factory default values if you get into a situation you don't like.
128 speed steps are active when Mid volts, Top volts, Start volts or the user- loadable speed table is active for much smoother operation.
Primary 2-digit addressing or advanced 4-digit addressing may be used.
Consist Addressing has a Special Feature allowing you to automatically turn off any undesired lighting when you add the engine to a consist.
TCS decoders support all programming modes plus OPS mode ( on-track programming ) and meet NMRA DCC standards for compatibility.
Auxiliary harness for attaching the VR 1.5 and adding blue wires for more function control. This harness will also be used for later additions to the T series.