Train Control Systems   T1 decoder

Now with BEMF!

Now with BEMF the T1 is our most economical motor control decoder. Even with its low price, this 2-lighting-function decoder has X series lighting effects, including Mars and Gyra light. It has Quiet Drive and Dither. It is supplied with our standard wiring harness. Other harnesses with NMRA 8-pin plugs are available. Go to harness selection for choices to simplify your decoder installation.  MSRP $21.95.    T1 Decoder Literature

Dimensions .900"x.659"x.257" or 22.86mm x 16.73mm x 6.52mm

Electrical specs:  1.3 amp continuous,  2 amp peek motor drive, 100ma function outputs.

• BEMF/ Load Compensation automatically adjusts to provide superb low speed and heavy load control.
• Adjustable Dim for using LED's and Rule 17 dimming.
• Auto detect allows operation on DCC only or DCC and DC power. TCS decoders are almost transparent on DC, making the engine act like a decoder isn't there. Brake on DC allows you to control the lights while the train is in a DC block.
• Quiet Drive is active at all times, which greatly reduces engine noise.
• Dither provides rapid bursts of power to overcome resistance. You control both the power and frequency. See slow speeds unequalled in the industry.
• Lighting Effects: Adjustable Dim, Mars, Gyra, Auto-reversing headlights, Opposite Dim, Flashing, single and double pulse strobes, Flashing light, and Random flicker. Rule 17 headlight dimming can be set to occur when stopped, opposite the direction of travel, or both. You always have manual control.
• Button Control allows you to pick the control buttons of your choice.
• Factory Reset lets you change most of your choices back to their factory default values if you get into a situation you don't like.
• 128 speed steps are active when Mid volts, Top volts, Start volts or the user- loadable speed table is active for much smoother operation.
• Primary 2-digit addressing or advanced 4-digit addressing may be used.
• Consist Addressing has a Special Feature allowing you to automatically turn off any undesired lighting when you add the engine to a consist.
• TCS decoders support all programming modes plus OPS mode ( on-track programming ) and meet NMRA DCC standards for compatibility.

• Goof Proof one year warranty is standard in all TCS decoders!

• Auxiliary harness for attaching the VR 1.5 and adding blue wires for more function control. This harness will also be used for later additions to the T series.