M3 Three Function Micro Decoder
 
 
Electronic Specifications:
  • One-amp continuous motor drive
  • 2-amp peak motor drive
  • Three 100 mA function outputs
Size:
  • Length: 0.570"
  • Width: 0.355"
  • Height:  0.132"

 

From the start the design criteria for the M3 decoder was to make it small for N scale but fully capable of powering HO locos! At 0.355" wide and 0.132" thick it will fit in many N-scale locos. With its smooth and strong 1-amp motor drive it is absolutely the smoothest decoder on the planet!

Features:
  • Auto detect allows operation on DCC only or DCC and DC power. TCS decoders are almost transparent on DC, making the engine act like a decoder isn't there. Brake on DC allows you to control the lights while the train is in a DC block.
  • X series features (click here for information on X series features)
  • Adjustable Dimming  (click for more information on this )
  • Quiet Drive is active at all times, which greatly reduces engine noise.
  • Dither provides rapid bursts of power to overcome resistance. You control both the power and frequency. See slow speeds unequalled in the industry.
  • Lighting Effects: Auto-reversing headlights, Blinking Ditch Lights, Mars, Gyra, Rotary Beacon, Single- and Double-Pulse Strobe, Opposite Dim, Flashing and Random flicker. Rule 17 headlight dimming can be set to occur when stopped, opposite the direction of travel, or both. You always have manual control.
  • Button Control allows you to pick the control buttons of your choice.
  • Factory Reset lets you change most of your choices back to their factory default values if you get into a situation you don't like.
  • 128 speed steps are active when Mid volts, Top volts, Start volts or the user- loadable speed table is active for much smoother operation.
  • Primary 2-digit addressing or advanced 4-digit addressing may be used.
  • Consist Addressing has a Special Feature allowing you to automatically turn off any undesired lighting when you add the engine to a consist.
  • TCS decoders support all programming modes plus OPS mode ( on-track programming ) and meet NMRA DCC standards for compatibility.
 
Goof-Proof Warranty as always. One-year no-questions-asked replacement warranty, handled entirely by TCS.
 

Installations ] Home ] Decoder ] What's New ] Literature ] TCS Dealers ] Warranty ] TCS Harnesses ] Dealer Application ] Contact Us ] FAQ ] Order Page ]

Entire contents © Copyright Train Control Systems 2003-2007 • Last Modified: Wednesday September 26, 2007 06:34 AM