| Electronic
Specifications: |
- One-amp
continuous motor drive
- Two-amp
peak motor drive
- Two
100 mA function outputs
|
| Size: |
- Length:
0.570"
- Width:
0.355"
- Height:
0.132"
|
|
|
|
|
|
This a PDF
file down load that includes pictures and installation instructions
for various loco's used commonly in the United Kingdom. The M1-UK is a
M1 decoder with the UK harness. It makes a very easy installation in
various popular loco's used in the United Kingdom such as the Bachmann
Crab, Hornby 8f, and the Hornby Black 5. This is a large
file and may take some extra time to down load depending on your
internet connection speed. |
|
| This
decoder is small enough for N scale but strong enough for HO!
From the start the design criteria for the M1 decoder was to make
it small for N scale but fully capable of powering HO locos! At 0.355"
wide and 0.132" thick it will fit in many N-scale locos.
With its smooth and strong 1amp motor drive it is well-suited for
many HO locos especially where space is at a premium. |
|
- Auto
detect allows operation on DCC only or DCC and DC power. TCS decoders
are almost transparent on DC, making the engine act like a decoder
isn't there. Brake on DC allows you to control the lights while
the train is in a DC block.
- Quiet
Drive is active at all times, which greatly reduces engine noise.
- Dither
provides rapid bursts of power to overcome resistance. You control
both the power and frequency. See slow speeds unequalled in the
industry.
- Lighting
Effects: Auto-reversing headlights, Blinking Ditch Lights, Mars,
Gyra, Rotary Beacon, Single- and Double-Pulse Strobe, Opposite
Dim, Flashing and Random flicker. Rule 17 headlight dimming can
be set to occur when stopped, opposite the direction of travel,
or both. You always have manual control.
- Button
Control allows you to pick the control buttons of your choice.
- Factory
Reset lets you change most of your choices back to their factory
default values if you get into a situation you don't like.
- 128
speed steps are active when Mid volts, Top volts, Start volts
or the user- loadable speed table is active for much smoother
operation.
- Primary
2-digit addressing or advanced 4-digit addressing may be used.
- Consist
Addressing has a Special Feature allowing you to automatically
turn off any undesired lighting when you add the engine to a consist.
- TCS
decoders support all programming modes plus OPS mode ( on-track
programming ) and meet NMRA DCC standards for compatibility.
|
| |
| Goof-Proof
Warranty as
always. One-year no-questions-asked replacement
warranty, handled entirely by TCS. |
|
