| Electronic
Specifications: |
- 1.3-amp
continuous motor drive
- 2.0-amp
peak motor drive
-
Two
100mA function outputs
- Integrated
8-pin NMRA plug
|
| Size: |
- Length:
0.845"
- Width:
0.680"
- Height:
0.165"
|
|
Pricing: $24.95 |
| |
|
|
|
| The
DP2X decoder is designed as a direct Plug N' Play decoder to fit
many different HO-scale locomotives. There is no wire harness. No
soldering is required. Installation is very easy. Just plug the decoder
directly into the locomotive DCC socket. |
| |
|
 |
 |
Top and angled views of decoder |
| |
| |
- BEMF (Back Electro Motive Force) Load
compensation for super smooth low speeds and accurate speed
modelling.
- X series features
(Click here for
information on X series features)
- Auto
detect allows operation on DCC only or DCC and DC power. TCS decoders
are almost transparent on DC, making the engine act like a decoder
isn't there. Brake on DC allows you to control the lights while
the train is in a DC block.
-
Three point acceleration and deceleration curves. Allows
stretching
of acceleration rates at the slow speeds. You are no longer
limited to a straight line
accel / decel rate.
- Quiet
Drive is active at all times, which greatly reduces engine noise.
- Dither
provides rapid bursts of power to overcome resistance. You control
both the power and frequency. See slow speeds unequalled in the
industry.
- Lighting
Effects: Auto-reversing headlights, Blinking Ditch Lights, Mars,
Gyra, Rotary Beacon, Single- and Double-Pulse Strobe, Opposite
Dim, Flashing and Random flicker. Rule 17 headlight dimming can
be set to occur when stopped, opposite the direction of travel,
or both. You always have manual control.
- Button
Control allows you to pick the control buttons of your choice.
- Factory
Reset lets you change most of your choices back to their factory
default values if you get into a situation you don't like.
- 128
speed steps are active when Mid volts, Top volts, Start volts
or the user- loadable speed table is active for much smoother
operation.
- Primary
2-digit addressing or advanced 4-digit addressing may be used.
- Consist
Addressing has a Special Feature allowing you to automatically
turn off any undesired lighting when you add the engine to a consist.
- TCS
decoders support all programming modes plus OPS mode ( on-track
programming ) and meet NMRA DCC standards for compatibility.
|
| |
| Goof-Proof
Warranty as
always. One-year no-questions-asked replacement
warranty, handled entirely by TCS. |
|
