|
Electronic Specifications: |
-
1.0-amp
continuous motor drive
-
2.0-amp peak
motor drive
-
Four 50 ma
function outputs
-
Golden
White LEDs
|
-
Length: 3.030"including LEDs
-
Width: 0.355"
-
Height: 0.135"
|
|
|
|
|
This drop in N scale decoder fits the following Atlas N scale
locomotives:
GP-38,
RS-11, Dash8-40B, Dash8-40BW, C628, C630, B23-7, B30-7, B36-7, Also
DCC ready version of GP-40, GP-40-2, SD-7, SD-9, SD-35, TrainMaster
and U25B. Decoder comes
standard with all
"X" series features
. MSRP $34.95 . Comes with
Golden White LEDs. Works great in DC and DCC mode. |
AMD4 Shown installed in Atlas N scale Dash8-40 locomotive
|
- Excellent slow speed control with TCS
auto adjusting BEMF!
- Drop in style decoder for easy
installation.
- Golden White LEDs
- X series lighting effects
-
Decoders are almost transparent on DC, making the engine act like
a decoder isn't there. Brake on DC allows you to control the
lights while the train is in a DC block.
-
Quiet Drive is active at all times.
-
Dither provides rapid bursts of power to overcome resistance. You
control both the power and frequency. See slow speeds unequalled
in the industry.
-
Lighting Effects: Auto-reversing headlights, Mars, Gyra,
Rotary Beacon, Single- and Double-Pulse Strobe, Opposite Dim,
Flashing and Random flicker. Rule 17 headlight dimming can be set
to occur when stopped, opposite the direction of travel, or both.
You always have manual control.
-
Button Control allows you to pick the control buttons of your
choice.
-
Factory Reset lets you change most of your choices back to their
factory default values if you get into a situation you don't like.
-
128 speed steps are active when Mid volts, Top volts, Start volts
or the user- loadable speed table is active for much smoother
operation.
-
Primary 2-digit addressing or advanced 4-digit addressing may be
used.
-
Consist Addressing has a Special Feature allowing you to
automatically turn off any undesired lighting when you add the
engine to a consist.
-
TCS decoders support all programming modes plus OPS mode (
on-track programming ) and meet NMRA DCC standards for
compatibility.
|
| |
|
Goof-Proof Warranty
as always. One-year no-questions-asked
replacement warranty, handled entirely by TCS. |
|
