|
Electronic Specifications: |
-
1.3-amp
continuous motor drive
-
2.0-amp peak
motor drive
-
-
Four
200 ma function outputs
|
-
Length: 2.860"
-
Width: 0.680"
-
Height: 0.145"
|
|
|
|
|
The A4X is a drop-in replacement for the locomotive light board. It
has the standard 12 volt supply for 12 to 14 volt bulbs. It is a
Four-function Quiet Drive decoder with Dither (digital pulse power),
and comes standard with all
"X" series features
All this for only $27.45
MSRP |
 |
| |
-
Decoders are almost transparent on DC, making the engine act like
a decoder isn't there. Brake on DC allows you to control the
lights while the train is in a DC block.
-
Quiet Drive is active at all times, which greatly reduces engine
noise.
-
Dither provides rapid bursts of power to overcome resistance. You
control both the power and frequency. See slow speeds unequalled
in the industry.
-
Lighting Effects: Auto-reversing headlights, Blinking Ditch
Lights, Mars, Gyra, Rotary Beacon, Single- and Double-Pulse
Strobe, Opposite Dim, Flashing and Random flicker. Rule 17
headlight dimming can be set to occur when stopped, opposite the
direction of travel, or both. You always have manual control.
-
Button Control allows you to pick the control buttons of your
choice.
-
Factory Reset lets you change most of your choices back to their
factory default values if you get into a situation you don't like.
-
128 speed steps are active when Mid volts, Top volts, Start volts
or the user- loadable speed table is active for much smoother
operation.
-
Primary 2-digit addressing or advanced 4-digit addressing may be
used.
-
Consist Addressing has a Special Feature allowing you to
automatically turn off any undesired lighting when you add the
engine to a consist.
-
TCS decoders support all programming modes plus OPS mode (
on-track programming ) and meet NMRA DCC standards for
compatibility.
|
| |
|
Goof-Proof Warranty
as always. One-year no-questions-asked
replacement warranty, handled entirely by TCS. |
|
