This pigtail connector is used primarily to connect speakers to our WOWMotherboards. Some of the motherboards we provide have 2-Pin JST connectors for connecting the speaker and if you choose to use a speaker other than the one that comes with your locomotive you will need one of these connectors to plug it in.
NEW! Smaller Connectors From TCS!
Image for size comparison. The New Micro Connector is at the top of the image, the Mini Connector is at the bottom.
These amazing new micro connectors are nearly half the size of our popular, super-small Mini Connectors that we have offered for years.
The new TCS Micro Connectors will fit in installations where our classic Mini Connectors would not.
Remarkably tiny, the Micro Connectors are useful where space is limited, but the convenience of a connector is still required.
So small they are hidden in plain sight!
These 4-Point Junction Boards have 4 solder pads joined together by 4 circuit traces. Use these boards to connect wires, resistors, bulbs, LED's, etc. without having to solder wires directly together. Feel free to cut the traces to isolate solder points!
This is a pack of 25 junction boards cut into 5 strips of 5 boards.
Dimensions: .33" x .28" x .03" or 8.38mm x 7.11mm x .76mm
21Pin to 9Pin JST or 7Pin JST.
9-Pin JST Female Extension plug.
9Pin JST Female socket.
This is a simple, 6 pin, JST, wired connector. When connected together it is .388" wide by .156" tall by .405" long, and it has 6" long wires on both ends. Each side of the connector has 6, 32 gauge wires (Red, Orange Blue, White, Grey, and Black), perfect for soldering.
Dimensions: .156" x .388" x .408" or 3.96 mm x 9.85 mm x 10.36 mm
This is a simple, 7 pin, JST, wired connector. When connected together it is .35" wide by .158" tall by .416" long, and it has 6" long wires on both ends. Each side of the connector has 7, 32 gauge wires (Red, Orange Blue, White, Yellow, Grey, and Black), perfect for soldering.
Dimensions: .158" x .35" x .416" or 3.96 mm x 9.85 mm x 10.36 mm