TCS Drop-In K0D8 Decoder Selection

Drop-in decoder for Kato N Scale engines: ALCO PA1, E9A, E8/9A, P42 Genesis. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . 2 Onboard superbright, Golden White LED's, with long leads. 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm

SKU: 1332

Drop-in decoder for Kato N Scale engines: F3A, F7A. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . 1 Onboard superbright, Golden White LED's, with medium length leads. 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm

SKU: 1333

Drop-in decoder for Kato N Scale engine: F40PH. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . 2 Onboard superbright, Golden White LED's, with short leads. 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm

SKU: 1338

Drop-in decoder for Kato N Scale engines: E9B, F3B, F7A, F7B, PB1. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . This decoder has no onboard LEDs because it is designed for locomotives without lights (B Units). 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm

SKU: 1339