TCS M1 Decoder Installation fo TT-Scale Tilling V300. It was performed by Krzysztof Czaplicki – Poland


The model is fitted with decoder socket (6 pins) and there was no need to modify anything. Decoder was glued with two sided type in free place near ballast. Instead of using 6pins plug the ends of decoders wires have been plated with tin and firmly put in the holes of decoder socket. To run locomotive and to program decoder I use Lenz Compact. I had to change values in some CVs and was totally satisfied with the results. The same installation could be done in following TT locomotives produced by Tillig: BR132/232/234 (the same locomotive family)
 

 

Like us on Facebook Subscribe to our YouTube Channel Join our newsletter
  Back To Top
Home
Entire contents © Copyright Train Control Systems 2004-2017