The installation is for TT-Scale BTTB E499 locomotive. It uses TCS T1 or M1 or MC2 decoder and was performed by a Krzysztof Czaplicki – Poland
Installation of T1
decoder in an older electric locomotive E499 (TT scale) produced in German
Democratic Republic by BTTB.
The model was produced when DCC was not even known so electric installation have to be changed . Motor and light has to be disconnect from electrical pickup, then wires of the decoder should be connected to pickup, motor and light. The model has enough space for T1, M1 or MC2 could be of course installed as well. After some changes in CVs model is running very well.