This installation is for N Scale Kato GE C44-9W uses TCS K1D4 Decoder and was performed by TCS

The three pictures above show the Kato GE C44-9W with the shell on.

 

This is a picture of the frame with the shell removed and the original lighting board installed.

 

After removing the original lighting board, apply Kapton tape to the area of the frame between the motor tabs so that the frame is isolated from the motor clips on the decoder.

 

Line up the tabs from the motor with the motor clips that are on the decoder.

 

This is a picture of the fully installed K1D4. This is an easy drop-in installation.

 

 

Like us on Facebook Subscribe to our YouTube Channel Join our newsletter
  Back To Top
Home
Entire contents © Copyright Train Control Systems 2004-2017