N-Scale Intermountain F9B with TCS IMF4 Decoder Installed - Performed by J.M.

First remove the shell by rocking it back and forth until it slips off the chassis. The image below shows the locomotive with the shell removed.

Next remove the screws holding the light board in place and remove the light board. Place the IMF4 back in where the lighting board was and screw it in place with the screws you removed. Your installation should look like the image below:

Simply replace the shell and your F9B is ready to run.

Like us on Facebook Subscribe to our YouTube Channel Join our newsletter
  Back To Top
Home
Entire contents © Copyright Train Control Systems 2004-2017