This installation is for N Scale Fleischmann 87337 Electric Locomotive Class 110 uses TCS EUN651P-18 digital decoder and was performed by A.G.
The two upper pictures show beautiful and very well made Fleischmann 87337 Class 110 Electric Locomotive prior to the TCS TCS EUN651P-18 Decoder Installation.
First remove the shell by squeezing it on either side of the plastic covers and gently rocking it back and forth until it slips off the frame.
Here is a picture of locomotive's 6Pin NMA socket where the DCC decoder will be plugged. Pin#1 (Orange wire) is marked in green.
Here is the top view of the original light board where the Pin#1 is marked in red.
Here is the exact orientation the TCS EUN651P-18 decoder needs to be plugged into the 6Pin NMA socket.
Plug in our TCS EUN651P-18 exactly the way shown above.
We use Kapton tape that was placed around the decoder to make sure it will not cause the short.
Put the shell back together and we are ready to run this engine.
|Like us on Facebook||Subscribe to our YouTube Channel||Join our newsletter|
Back To Top Home Entire contents © Copyright Train Control Systems 2004-2018