TCS Z2P-1" Decoder Installation for N-Scale Con-Cor ALCO PA-1
Before the decoder is installed. Original light board with plug (marked in red) is shown.
Dummy plug removed by gently pulling it off .
Picture of The Locomotive's chassis with our Z2P-1" decoder plugged-in (marked in red)
Close up of an installation
Some decoder's board filing might be required to fit the Z2 board between Locomotive chassis - if that is the case gently file both sides of the board. Install the shell
|Like us on Facebook||Subscribe to our YouTube Channel||Join our newsletter|
Back To Top Home Entire contents © Copyright Train Control Systems 2004-2017