logo
Life Like Proto 2000 GP20:
MC2 Decoder Installation
logo

First remove the couplers by unscrewing them. Make sure you do not lose any part of them because they do have a tendency to spring apart.

Next remove the shell by squeezing it on either side and gently rocking it back and forth until it comes off.

Now remove the screws holding in the lighting board and remove the clips holding the wires on the board.

Next install the MC2 as shown below.

 

 

Cannot connect to the database because: Access denied for user 'tcsdcc2_Mattmin'@'localhost' (using password: YES)