This installation of TCS DP2X or TCS DP5 Decoder is for HO Scale Kato EMD SD70MAC Cab Headlight and was performed by A.G.

 

Pictures of Kato SD70MAC Cab Light with its shell on prior to the DP2X or DP5 decoder installation.

 

Grasping the shell at the center top of both sides (being careful not to crush the grills), lift the shell straight up and off of the chassis. Picture of the locomotive with its shell removed.

 

Close-up of the original light board with 8Pin NMRA socket

 

Plug the DP2X into the socket so that the pin#1 of the decoder (check the decoder manual for pin designations) goes into pin#1 of the socket.

 

As an alternative, we recommend using our TCS DP5 - 5 function drop-in decoder that will fit this engine perfectly and will give you option of extra light functions!

Hold the shell in one hand and the chassis in your other hand. Lining up the front of both pieces, lower the shell onto the chassis, keeping the lower edge of the shell parallel with the chassis.

 

 

Like us on Facebook Subscribe to our YouTube Channel Join our newsletter
  Back To Top
Home
Entire contents © Copyright Train Control Systems 2004-2017